‹

›

‹

  • 1050 1060 1070 1100 1200 1235 Aluminum Rod
  • 1050 1060 1070 1100 1200 1235 Aluminum Rod
  • 1050 1060 1070 1100 1200 1235 Aluminum Rod
  • 1050 1060 1070 1100 1200 1235 Aluminum Rod
  • 1050 1060 1070 1100 1200 1235 Aluminum Rod
  • 1050 1060 1070 1100 1200 1235 Aluminum Rod

›

1050 1060 1070 1100 1200 1235 Aluminum Rod
Product Name aluminum bar
Capacity 1000 tons/month
Contact Us
Product Description
Product Show
Factory Workshop
Product Packaging
1050 1060 1070 1100 1200 1235 Aluminum Rod

—Product Description


Product Namealuminum bar
Capacity1000 tons/month
CertificationsISO 9001
Material1000, 2000, 3000, 4000, 5000, 6000,7000series
a) 1000 Series: 1050, 1060, 1070, 1100, 1200, 1235, etc.
b) 2000 Series: 2014, 2024, etc.
c) 3000 Series: 3003, 3004, 3005, 3104, 3105, 3A21, etc.
d) 4000 Series: 4045, 4047, 4343, etc.
e) 5000 Series: 5005, 5052, 5083, 5086, 5154, 5182, 5251, 5454, 5754, 5A06, etc.
f) 6000 Series: 6061, 6063, 6082, 6A02, etc.
g)7000 Series:7052,7075,7085,etc.
Diameter1-600mm or Customized
Length1-12mm or Customized
Payment30% despoit in advance,70% balance before delivery
Application1)Further making utensil.
2)Solar reflective film
3)The appearance of the building
4)Interior decorating:ceilings,walls,etc.
5)Furniture cabinets
6)Elevator decoraction
7)Signs,nameplate,bags making.
8)Decorated inside and outside the car
9)Household appliances:refrigerators,microwave ovens,audio equipment,etc.
10)The consumer electronics:mobile phones,digital cameras,MP3,U disk,etc.
Container size20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High)聽24-26CBM
40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High) 54CBM
40ft HC:12032mm(Length)x2352mm(Width)x2698mm(High) 68CBM
TemperO/H111 H112 H12/H22/H32 H14/H24/H34 H16/H26/H36 H18/H28/H38 H114/H194, etc.
Tolerance1%
ApplicationDecoration, heat-sink device, external walls, storage, sheets for construction, etc.
FeatureGood rust resistance, not suitable for heat treatments, good corrosion resistant
performance, well welding property, good plasticity, low strength but suitable
for cold working hardening

I. Chemical Composition

Aluminum rods are mainly categorized as wrought aluminum alloys. Common series include 1xxx (pure aluminum), 2xxx (Al-Cu), 6xxx (Al-Mg-Si), and 7xxx (Al-Zn). Specific compositions are listed in the table below:

Alloy Series

Typical Grade

Main Composition (wt%)

Characteristics

1xxx

1060

Al ≥99.6%

High conductivity, corrosion resistance, low strength

2xxx

2024

Cu 4.4%, Mg 1.5%, Mn 0.6%

High strength, fatigue resistance (used in aerospace structures)

6xxx

6061

Mg 1.0%, Si 0.6%, Cu 0.25%

Balanced properties, weldability (for construction and machinery)

7xxx

7075

Zn 5.6%, Mg 2.5%, Cu 1.6%

Ultra-high strength (aerospace applications)



II. Mechanical Properties

Mechanical properties are significantly influenced by heat treatment states (e.g., T4, T6, T651). Typical data are as follows:

Alloy Grade

Condition

Tensile Strength (MPa)

Yield Strength (MPa)

Elongation (%)

Hardness (HB)

1060

O (Annealed)

60-95

20-40

30-40

15-25

2024

T351

470-500

325-350

10-12

120-135

6061

T6

310-330

275-290

12-15

95-100

7075

T651

540-570

480-500

5-10

150-160

Notes:

T6: Solution treatment + artificial aging, significantly enhances strength.

O Condition: Annealed state, high ductility but lowest strength.

7xxx Series: Highest strength but poor corrosion resistance; surface protection required.



III. Key Influencing Factors

Alloying Elements

Cu, Zn, Mg: Enhance strength by forming strengthening phases (e.g., Al₂Cu, MgZn₂).

Si: Improves fluidity (casting performance).

Mn, Cr: Refine grains and enhance corrosion resistance.

Processing Techniques

Cold Working (e.g., drawing, rolling): Increases strength via work hardening.

Heat Treatment: T6 treatment can increase the strength of 6061 alloy by approximately 3 times.


1050 1060 1070 1100 1200 1235 Aluminum Rod

—Product Show

下载.jpg

1050 1060 1070 1100 1200 1235 Aluminum Rod

—Factory Workshop

1050 1060 1070 1100 1200 1235 Aluminum Rod

—Product Packaging

Related Products

BAOWU Metal
BAOWU Metal as a specialist in various steel products, we supply and sell silicon steel, carbon steel, galvanized steel and more. All products get corresponding certifications. We are committed to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction.
Our company is located in Wuxi City, Jiangsu Province, which is the largest steel processing center in China. Our teams specialized in the industry for over 14 years with rich experience in different silicon steel projects, and are familiar with variety of silicon steel standards, such as CE, SGS and so on. We can design and customize for unique requirements, and assure the safety, efficiency and reasonable price. Progressively we have expanded and now have five purpose built distribution warehouses and specialist steel process facilities offering services to the mining, construction, engineering and general fabrication industries around World.
Email : steelbaowu@gmail.com

Get Your Free Quote Now!

Submit